Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MSK071C-0200-NN-M1-UG2-NNNN

MSK071C-0200-NN-M1-UG2-NNNN

by Bosch Rexroth Indramat
$13,600.00 - $13,600.00
$13,600.00
$13,600.00 - $13,600.00
$13,600.00
In Stock, Ships Fast
Bosch Rexroth Indramat's MSK071C-0200-NN-M1-UG2-NNNN is a synchronous servomotor that requires a drive controller for operation. It features an optical encoder system, and must only be utilized when the proper documentation has been thoroughly reviewed. Its usage is strictly tied to approved spare parts and accessories, with operation only permissible once grounding connection is confirmed. Maintenance procedures require disconnection from power sources beforehand. Servomotor operation is controlled and supervised by the attached drive controller and it should be adequately cooled prior to handling. The device lacks a flushing connection with a blind plug. It includes cables from the manufacturer only and isn't suitable for areas with potential for explosive materials. A size code of 071 characterizes the product, which has corrosion protection housing and four pole pairs. The servomotor uses a Hiperface interface and multiturn absolute design encoder, can be installed in any position and strictly prohibits fluid accumulation at the output shaft. The smooth, backlash-free motor shaft ensures low-noise operation.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Model: MSK071C-0200-NN-M1-UG2-NNNN
  • Product Type: Synchronous Servomotor
  • Required Accessory: Drive Controller
  • Encoder System: Optical
  • Required Reading: Associated Documentation
  • Approved Parts: Manufacturer Approved Only
  • Safety Requirement: Established Grounding Connection
  • Operational control: Drive Controller
  • Recommended After-use Procedure: Sufficient Cooling Time
  • Handling: Not in Energized State
  • Flushing Connection Availability: No
  • Recommended Cables: Manufacturer Supplied Only
  • Size Code: 071
  • Corrosion Protection: Yes
  • Required Testing: Acceptance Test before Startup
  • Explosive Environment Suitability: No
  • Number of Pole Pairs: Four
  • Encoder Interface: Hiperface, Multiturn Absolute Design
  • Installation Possibilities: Any Position
  • Fluid Accumulation Management: No Accumulation at Output Shaft
  • Surface Characteristics Altering: May Cause Explosion
  • Motor Shaft Characteristics: Plain & Smooth for Quiet Running
  • Shipping: Safe Delivery through Trustworthy Agents.

Get In Contact

Email: sales@servosupplier.com

Phone Number: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Servo Supplier is not an authorized distributor. We sell new surplus and refurbished products, all warranties are with Servo Supplier and not the manufacturer.