Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MSK071E-0450-FN-M1-AG0-NNAN

MSK071E-0450-FN-M1-AG0-NNAN

by Bosch Rexroth Indramat
Request a quote
The MSK071E-0450-FN-M1-AG0-NNAN is a Bosch Rexroth Indramat synchronous servomotor, defined by a size code of 071 and equipped with a multi-turn absolute encoder. It's operation is solely permitted with manufacturer-supplied accessories and requires a drive controller. As this motor's housing can exceed 60°C during operation, caution should be taken to avoid accidental startup during cleaning and disconnection under pressure. Environmental protection against corrosion from salt mist and lubricants is necessary, while adequate heat radiation at the installation site is vital. The product, RoHS compliant and EAC certified, features a Hiperface interface and fixed bearing on the B side. For storage, conditions should be cool and dry, and comprehensive checks for damages are necessary if stored for more than a month. The device needs appropriate grounding and horizontal transport to avoid tipping or dropping. In the event of repeated malfunction, discontinuation of usage is recommended. Delivery is available worldwide.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: MSK071E-0450-FN-M1-AG0-NNAN
  • Motor Type: Synchronous Servomotor
  • Size Code: 071
  • Encoder Type: Multi-turn absolute
  • Accessories Requirement: Provided by the manufacturer
  • Electric Junctions: Live during operation
  • Operating Requirement: Drive controller
  • Safety Measures: Prevention from accidental startup during cleaning
  • Operating Temperature: Over 60°C
  • Disconnection State: Must not be pressurized
  • Connector Security: Must be securely tightened
  • Grounding Requirement: Using motor cable
  • Corrosion Protection: Yes, against aggressive materials
  • Encoder Interface: Hiperface
  • Storage Condition: Cool and dry place
  • Safety Check: In case of frequent malfunctioning
  • Fixed Bearing Location: B side
  • Compliance: RoHS and EAC Certified
  • Heat Radiation: Sufficient at installation location
  • Memory: Stores motor warning and shutdown threshold values
  • Isolation System: With high dielectric load
  • Transportation Orientation: Horizontal
  • Transport Safety: Safeguard against tipping or dropping
  • Surface Condition: No salt mist, condensation, or icing
  • Visual Inspection Requirement: After storage if bearings are over a month old
  • Delivery: Worldwide

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204