Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
subseries image of MSK100A-0300-NN-S1-BG0-NNNN

MSK100A-0300-NN-S1-BG0-NNNN

by Bosch Rexroth Indramat
Request a quote
The Bosch Rexroth Indramat MSK100A-0300-NN-S1-BG0-NNNN is a synchronous servomotor requiring careful handling during disassembly to prevent damages. Operating under harsh conditions or at high temperatures can greatly decrease its lifespan due to bearing grease decomposition. Regular inspections are vital, particularly for damage to connection cables, and any running noises may suggest damaged bearings or foreign bodies inside the device. Cooling downtime after use is approximately 140 minutes, and maintaining a relative humidity of 75% at 30°C during transit is optimal. Avoidance of dust and vibration during storage and transportation will help maintain function, as will ensuring the product's protective conductor connection remains secure. Maintenance should only be performed when the device is not in use, and only authorized personnel should replace motor bearings. Varying operations may cause internal heat dissipation and the presence of components with leakage capacitance. The motor is constructed with brass and copper components, operates on three-phase power systems, and has no key associated with its shaft.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Model: MSK100A-0300-NN-S1-BG0-NNNN
  • Product Type: Synchronous Servomotor
  • Secured Against Motion/Dropping: Required for Disassembly
  • Service Life Conditions: Reduced under unfavorable conditions
  • Bearing Lifespan: Less at unacceptably high temperatures
  • Inspection Requirement: Regular inspection of connection cables
  • Sign of Damage: Running noise due to damaged bearing or foreign bodies
  • Shutdown Requirement: Disconnection of Electrical connections after discharging time
  • Cooling Time: 140 minutes
  • Transit Condition: 75% relative air humidity at 30°C
  • Possible Damage Causes: Excessive dust or chips over surface
  • Maintenance Precaution: Motor must not be in running mode
  • Storage/Transportation Condition: No vibration allowed
  • Bearing Replacement: To be done only by authorized personnel
  • Voltage Supply Requirement: Necessary for operation
  • Operating Parameters: Heat dissipation obstructed when outside specified parameters
  • Windings Code: 0300
  • Material Used: Brass and Copper
  • Phases: Three
  • Shaft Key: Absent
  • Worldwide Delivery: Available

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204