Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

MSK100B-0400-NN-S2-AG1-RNNN

Request a quote
The MSK100B-0400-NN-S2-AG1-RNNN is a synchronous servomotor crafted by Bosch Rexroth Indramat that may demand routine maintenance under unfavorable environmental conditions. During operation, it generates axial and radial forces on its bearings and shaft, respectively, with a potential for bearing failure due to grease reduction, mechanical damage, or increased wear. Installation can be achieved in any orientation with a minimum distance of 100mm maintained in vertical convection from nearby components. The motor features a smooth, front-center-holed DS thread compliant with DIN 332, Part 2 specifications and comes equipped with a fixed bearing on the B side for enhanced concentricity quality. Its temperature monitoring sensor ensures automatic motor shut-off at excessive temperatures. Despite the existence of a holding brake, it is not viable as a service brake. While transport conditions typically range between -20°C to 80°C, commissioning and maintenance should only occur in a well-ventilated, non-explosive environment.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: MSK100B-0400-NN-S2-AG1-RNNN
  • Product Type: Synchronous Servomotor
  • Axial and Radial Forces: Yes
  • Installation Orientation: Any
  • Liquid Tolerance: None (must be free of liquids)
  • Permissible Radial Force: Dependant on bearing service life, force action point and arithmetically averaged speed
  • Position Shift: Occurs when no axial fitting of drive pinions on machine side
  • Fixed Bearing: Located on B side
  • Concentricity Quality: Increased
  • Holding Brake: Not for service use
  • Motor Frame Size: Proportional to power rating
  • Shaft Type: Smooth, with front centering hole featuring DS thread as per DIN 332, Part 2
  • Clearance Requirement: 100mm from adjacent components
  • Humidity Tolerance: 1g/m3 to 29g/m3
  • Temperature Monitoring: Yes, shuts down at 150°C
  • Transportation Temperature Range: -20°C to 80°C
  • Connector Type: Pins type for flanged sockets with fixed connectors
  • Shipping: Worldwide

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204