Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

MSK100C-0200-NN-S1-RP2-NNNN

Original price $17,840.05 - Original price $17,840.05
Original price
$17,840.05
$17,840.05 - $17,840.05
Current price $17,840.05
Available, Shipping Varies
The MSK100C-0200-NN-S1-RP2-NNNN synchronous servomotor, produced by Bosch Rexroth Indramat, features a size code 100. The motor is equipped with an integrated output shaft and an optical encoder system. Suitable to use in an environment where explosive atmospheres potentially occur, this motor, however, should not be directly connected to either a single-phase or three-phase network. The handling must follow strict guidelines laid out in the documentation to avoid damage or injuries. The product is not intended for severe temperature fluctuations and requires cooling for at least 140 minutes post-use. Additional sensors or actuators may be necessary for controlling and monitoring. Safety gloves are recommended when touching the motor after use due to surface heat. The motor comes with a holding brake and is cooled by natural convection. Additionally, the motor should always be stored and transported in a horizontal position and only handled by skilled electricians.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: MSK100C-0200-NN-S1-RP2-NNNN
  • Product type: Synchronous servomotor
  • Size Code: 100
  • Additional Product Features: Integrated with output shaft and optical encoder system
  • Product Suitability: Suitable for occasional explosive atmosphere
  • Use Limitation: Cannot be directly used on a single-phase or a three-phase network
  • Assembly Requirement: Necessity of additional actuators and sensors
  • Mounting Instruction: According to the product documentation
  • Temperature Limitation: Not indicated for extreme temperature fluctuations
  • Accessories: Can connect with manufacturers cables and spare parts
  • Product Safety Precaution: Needs to be cooled for at least 140 minutes before working on
  • Cooling Method: Natural convection
  • Ignition Level: Can cause ignition sparks if disconnected or connected under load
  • Key Feature: Integrated holding brake for internal drive check
  • Design: C frame length
  • Storage and Transportation: Should be done in a horizontal orientation only
  • Mounting Requirement: Needs to be executed on a clean and dry surface
  • Handling Instruction: Meant to be handled by skilled electricians only.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204