Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

MSK101D-0450-NN-S1-BG2-NNNN

Original price $4,183.00 - Original price $4,183.00
Original price
$4,183.00
$4,183.00 - $4,183.00
Current price $4,183.00
Available, Shipping Varies
Request a quote
The MSK101D-0450-NN-S1-BG2-NNNN, a Bosch Rexroth Indramat synchronous servomotor, requires 100mm of vertical convection space and features a KTY84 type temperature sensor. It is protected by an IP 65 rated casing, meeting EN 60034-5 standards. For bearings older than a year, an initial run without load at 800-1000RPM is necessary before commissioning. Its transportation and storage should be conducted in a horizontal orientation, using shock absorbers if vibrations may occur. Mechanical and electrical connections must be confirmed intact before commissioning and all cap nuts must be fully tightened. The motor must be shut down by decelerating the drive to standstill mode with control commands. Additionally, motor connection cables need regular checks for damage. The unit is environmentally friendly, highly durable, and has a length code of D. Its shaft facilitates the coupling of driven machine elements through tensioning elements, clamping sets, or sleeves.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Model Number: MSK101D-0450-NN-S1-BG2-NNNN
  • Cooling Requirement: Unhindered vertical convection with a distance of 100mm from adjacent components on the side
  • Temperature Sensor: KTY84 type
  • Protection Standard: IP 65 following EN 60034-5 specifications
  • Running Speed Before Commissioning: 800RPM to 1000RPM without load
  • Motor Orientation During Transportation and Storage: Horizontal
  • Tightening Torques: To be considered while connecting to machine
  • Power Connector: Use only fully tightened cap nuts
  • Electrical Connectors: Output direction towards B side
  • Shutdown Procedure: After decelerating the associated drive to standstill mode using machine-side control commands
  • Cleaning Requirement: Regular removal of excessive dust, chips or dirt
  • Cable Condition: To be checked for damage at regular intervals and replaced if needed
  • Environmental Impact: None
  • Durability: High
  • Ruggedness: High
  • Length Code: D
  • Motor Shaft: Supports the coupling of machine elements to be driven by using tensioning elements or clamping sets or sleeves.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204