R911250115
The R911250115 (MDD090C-N-030-N2L-110PB2) is a digitally controlled AC servomotor engineered by Bosch Rexroth Indramat. The device employs a servo feedback system for precise control and stores relative position data obtained from encoders in its drive controller. The R911250115 (MDD090C-N-030-N2L-110PB2) possess an in-built data storage for parameter tracking and supports a winding inductance of 2.6mH. The outer casing is coated with a resistant RAL 9005 black prime coat, and the radial and axial loads produced during operaion are absorbed by fixed and floating bearings. The servomotor uses an electrically actuated blocking brake system and offers high cyclic load handling due to electronic commutation.
The R911250115 (MDD090C-N-030-N2L-110PB2) strictly functions within defined installation elevation and ambient temperature limits, with protective measures against external object infiltration. Its flexible torque optimization is governed by DC bus voltage. Its housing has a resistant coating against discoloration, chalk build up, and weathering. It is designed for use with thread-mounting flanges, although thermal stress can occur when bevel gear pinions are employed. Ground connection with the drive amplifier is a must. Only trained personnel should undertake the mounting and starting procedures. The storage of the unit should be in a dust-free, shock-free dry environment, with temperature requirements ranging between -25°C to 85°C to prevent damage, particularly to the motor bearings.
