R911317354
Bosch Rexroth Indramat's R911317354 (MSK100C-0300-NN-M2-AP0-RNNN) is a high-performing synchronous servo motor, which, when paired with a drive controller, forms an efficient drive controller system. The controller powers the motor via a specialized power cable connected to the power socket located on side A of the housing. The feedback cable connects the motor and controller. Furthermore, it incorporates a multiturn optical encoder with an EnDat 2.1 interface and 2048 signal periods for accurate measurement and communication of motor speed, torque, and position. It is advised to have the controller programmed before commissioning the servo system. Bearing a keyway and a shaft seal, the main motor shaft should only be installed and operated by qualified personnel to eliminate installation errors.
Thoroughly conceived for natural convection, the R911317354 (MSK100C-0300-NN-M2-AP0-RNNN) servo motor can adopt surface cooling when needed, providing higher torque and current. However, surface cooling requires an additional cooling fan or blower. Positioned at a site elevation between 0 and 1000 meters, the motor operates optimally at ambient temperatures ranging from 0 to 40 degrees Celsius. There is no built-in holding brake, although optional ones are available for separate purchase. With a protection rating of IP65, the R911317354 (MSK100C-0300-NN-M2-AP0-RNNN)'s housing showcases improved concentricity and runout. Weighing 45.1 kilograms, this servo motor offers varied housing designs for MSK motors.
