R911318419
The R911318419 (MSK071C-0300-NN-M1-UG1-NNNN) is a synchronous servomotor produced by Bosch Rexroth Indramat, featuring a standard design that relies on a temperature sensor to regulate operating temperatures. The unit houses specific temperature thresholds for motor warning and shutdown in its encoder data memory, and is equipped with a robust insulation system to handle high dielectric loads. Designed for transport temperatures between -20°C and 80°C, it is safeguarded with protective covers and sleeves on the bearings and shaft. These components, however, should only be removed immediately prior to assembly. Extra care should be taken if motor deployment occurs after extended storage, with visual inspection for damage being highly recommended.
Repeated high voltage inspection tests are discouraged as they may damage the motor parts and the product displays a low relative air humidity of 5%. This motor has a maximum radial shock load limit of 300m/s2 for 11ms and is designed to operate without any fluid around its output shaft. The housing, void of additional varnish coating, supports plain quiet-running shaft. It's important to note that the device's friction surface should be devoid of lubricants and the holding brake does not provide personal protection. To prevent possible explosion hazards and ensure optimum heat dissipation, the motor should be maintained clean and free of contamination. Constraints of avoiding salt mist, icing on the surface during operation, storage and transport as well as protection against direct sun exposure or light are also necessary.
