Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of RAC 2.3-200-460-AP0-W1

RAC 2.3-200-460-AP0-W1

by Bosch Rexroth Indramat
$14,000.00 - $14,000.00
$14,000.00
$14,000.00 - $14,000.00
$14,000.00
Available, Shipping Varies
The Bosch Rexroth Indramat RAC 2.3-200-460-AP0-W1 is a modular main spindle drive controller designed to accurately control motors at all speeds. The unit can safely connect to three-phase supply networks and has a direct current braking feature to safely stop the drive during power loss. Its design includes an additional encoder input for added motor or spindle feedback. Despite a decrease to 80% rated data at an operating temperature of 55°C, the unit remains reliably functional. Conveniently, the controller can connect to standard CNC controls through its built-in analog speed set-point interface. The unit, which is IP-10 degree protected against water in accordance with EN 60 529/DIN VDE 0470 specifications, is designed for an altitude of up to 1,000m above sea level, and is safeguarded against condensation. Please note that it does not support additional interfaces or bleeders and must be grounded when connected to a motor.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Name: RAC 2.3-200-460-AP0-W1 Main Spindle Drive Controller
  • Structure: Modular
  • Motor Control: Capable of controlling motors at very low speeds
  • Power Supply: Direct connection to three-phase supply networks
  • Main Spindle Drive Brake System: Direct current braking action during power failure
  • Additional Features: Additional encoder input for second motor or spindle feedback
  • Operating Temperature: Maximum allowed 55°C with 80% reduced rated data
  • Interface: Analog speed set-point interface with +/-10V rating, connected to X4 connector
  • Controller Voltage Bus: Present
  • Control Panel: Present
  • Installation Altitude: Maximum of 1,000m above sea level
  • Condensation: No condensation allowed during operation
  • Position of Programming Module: Fitted at the bottom
  • Protection Level: IP 10 degree as per EN 60 529/DIN VDE 0470 specifications, water resistant
  • Current Rating: Typical 300A
  • Additional Interface or Bleeder: Not supported
  • Motor Feedback Connection: Connected via X3 connector
  • Grounding Requirement: Motor must be grounded when connected
  • Cable Core Installation: Power cable cores should be twisted during installation

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204