Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
manufacturer image of SD-B4.140.020-00.000

SD-B4.140.020-00.000

by Bosch Rexroth Indramat
$2,303.34 - $2,303.34
$2,303.34
$2,303.34 - $2,303.34
$2,303.34
Available, Shipping Varies
The Bosch Rexroth Indramat SD-B4.140.020-00.000 is a robust permanent-field servomotor designed with a commutation sensor and brushless tacho. It features a special magnet configuration enhancing resistance to demagnetization and includes a terminal block located in the top right corner. The motor must withstand multidirectional tensions from radial and axial forces, flexural torque, and torsion, alongside altering fit characteristics under continuous loading. It necessitates proper installation for adequate heat dissipation due to the lack of a manufacturer-fitted disk brake. Operating at 206 V/1000/rpm at 40°C ambient temperature, it requires a compatible inverter matching the motor and inverter currents. The unit supports IM B5 mounting, endures up to 200 N axial force, and includes an NTC thermostat for temperature monitoring. The tacho board of this motor can be dismantled for maintenance, and its tacho cable should not surpass 100 m. Cables must be manufacturer-approved, with connection sockets and tacho board replaceable if needed.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Model: SD-B4.140.020-00.000
  • Motor Type: Permanent-field Servomotor
  • Commutation Sensor: Yes
  • Tacho: Brushless
  • Terminal Block Location: Top right corner
  • Demagnetization Resistance: High
  • Magnet Configuration: Special
  • Fit Characteristic Changes: Due to alternating torques
  • Multidirectional Tension Factors: Radial/axial forces, flexural torque, torsion
  • Disk Brake: Not fitted
  • Voltage Constant: 206 V/1000/rpm at 40°C
  • Axial Force Capacity: 200 N
  • Mounting Style: IM B5
  • Temperature Monitoring: NTC thermostat
  • Short Circuit Braking Resistance: 3.3 Ohms
  • Minimum Energy: 293 W
  • Approved Inverter: Required
  • Tacho Cable Length: Must not exceed 100 m
  • Tacho Board Replacement: Enabled
  • Connection Socket Replacement: Allowed
  • Live Terminals: When rotor is driven
  • Installation Requirement: Adequate heat dissipation
  • Sealing Requirement: Pin 12 of tacho connector with blanking plug
  • Approved Cable: Required

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204