Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
manufacturer image of SD-B5.250.030.10.000

SD-B5.250.030.10.000

by Bosch Rexroth Indramat
$3,255.68 - $3,255.68
$3,255.68
$3,255.68 - $3,255.68
$3,255.68
Available, Shipping Varies
The Bosch Rexroth SD-B5.250.030.10.000 is a permanent-field servomotor, engineered for inverter operation and featuring electronic commutation. Equipped with ferrite permanent magnets, the motor includes brushless tacho and commutation sensors for precise rotor position detection and velocity feedback, integral to the Servodyn drive concept. Operable within 0 to 40°C, correct installation ensures adequate heat dissipation via natural convection and thermal radiation. At 489 mm length and 58.6 kg weight, the motor delivers a torque constant of 1.11 Nm/A, with a standstill current rating of 22.5 A and a peak current of 67.5 A at 20°C. Ball bearings, guaranteed for a minimum of 20,000 hours, are part of the design, and the motor should only be handled by the manufacturer for repairs. Direct contact with live surfaces should be avoided to prevent injury. Only compatible inverters should be used to avoid damage or reduced performance.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Model: SD-B5.250.030.10.000
  • Type: Permanent-field servomotor
  • Operation: Inverter operation
  • Commutation: Electronic commutation
  • Rotor Material: Permanent magnets made of ferrite
  • Sensors: Brushless tacho and commutation sensors
  • Sensor Function: Rotor position detection and velocity feedback
  • Drive Concept: Servodyn
  • Compatible Device: Compatible inverter required
  • Applications: Electrical and mechanical-related applications
  • Ambient Operating Temperature: 0 to 40°C
  • Bearings: Ball bearings at flange end
  • Bearing Service Life: 20,000 hours minimum
  • Current in Standstill Mode: 22.5 A
  • Peak Current at 20°C: 67.5 A
  • Torque Constant: 1.11 Nm/A
  • Length: 489 mm
  • Weight: 58.6 kg
  • Installation Requirements: Heat dissipation by natural convection and thermal radiation; touch guard if necessary
  • Caution: Surface may be too hot when live; never knock or hammer shaft extension
  • Dismantling Restriction: Only manufacturer allowed to dismantle the device

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204