Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of VT 2000 S

VT 2000 S

by Bosch Rexroth Indramat
$1,525.16 - $1,525.16
$1,525.16
$1,525.16 - $1,525.16
$1,525.16
In Stock, Ships 3 - 5 Days
The Bosch Rexroth VT 2000 S is an electrical amplifier specifically designed to regulate the control of proportional pressure valves without the need for electrical position feedback. It supports differential input with a DC power input requirement ranging from 22 to 35 Volts, along with a nominal input of 24 Volts. The model operates leanly, not exceeding 25 VA in power and 1 Amp in current consumption. Presented in a compact Euro card structure, this electrical amplifier measures 128.4 mm height, 20 mm width, and 182 mm depth. It offers durability with operational temperatures ranging from 0 to 50 degrees Celsius and can be stored between -25 to 85 degrees Celsius. Weighing approximately 100 grams, its connection type is a 32-pin male connector. Special attention must be adhered to during installation, specifically around the correct use of jumpers, solenoids, command values, and cable positioning to maintain optimal performance.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Type: Electrical Amplifier
  • Application: Control of proportional pressure control valves without electrical position feedback
  • Input: Differential
  • Nominal DC Input: 24 Volts
  • Upper Limit DC Input: 35 Volts
  • Lower Limit DC Input: 22 Volts
  • Power Consumption: Not exceed 25 VA
  • Current Consumption: Not exceed 1 Amps
  • Format: Euro card
  • Height: 128.4 millimeters
  • Width: 20 millimeters
  • Depth: 182 millimeters
  • Working Temperature Range: 0 to 50 degrees Celsius
  • Storage Temperature Range: -25 to 85 degrees Celsius
  • Weight: Approximately 100 grams
  • Connection: 32-pin male connector
  • Installation Requirement: Disconnected from electrical power supply
  • Measurement Instruments Requirement: Input resistance exceed 100 kiloohms
  • Command Values Requirement: Use of gold-plated relays
  • Command Value Cables Requirement: Only Shielded
  • Signal and Solenoid Cables Requirement: Should not be laid near power cables
  • Distance Requirement: At least 1 meter from aerial lines, radar lines and radar equipment
  • Installation Personnel: Trained+

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204