AKM52K-ACC2R-00
by Kollmorgen
The Kollmorgen-produced AKM52K-ACC2R-00 is a high-quality brushless DC servomotor distinctively designed for complex positioning tasks in machinery demanding elevated stability and dynamics. With permanent magnets within the rotor, the motor utilizes K-type winding and is fitted with a 24V holding brake. The device falls under the 3K3 climate category and requires power derating of 1% per K between 40°C to 50°C and up to 1000m above sea level. Weighing approximately 5.8kg, the servomotor has a rotor inertia of 6.2 J, static friction torque of 0.04 Nm, a standstill torque of 8.60 Nm, and a standstill current of 9.3 A. The motor's maximum BUS reaches 640 VDC. Its ball bearings, filled with grease for 20,000 operational hours under normal conditions, need replacement after 20,000 duty hours or at the presence of bearing noise, which should be checked every 2500 operating hours. Please remember that the motor's surface can run hotter than 100°C, refrain from touching it until it cools to below 40°C. For safety, remove any shaft key before independent operation.
