Danaher

The HS35R0200D1P7 encoder by Danaher is part of the Dynapar Encoders series. It delivers 200 pulses per revolution resolution, fits a 3/4-inch bore...

The Danaher P315-L is a 2-phase bipolar MOSFET chopper servo drive from the API Servo Drives series. It features 95-132 VAC, 50/60 Hz input, 0.2–6....

The M112-FD12E stepping motor from Danaher’s Slo-Syn Stepping Motors series delivers reliable motion control in harsh environments. It features a 3...

The M062-FD09 stepper motor from Danaher is part of the Slo-Syn Stepping Motors series. It offers a holding torque of 125 oz-in (88 Ncm), a NEMA 23...

The Danaher M062-FC03 from the Slo-Syn Stepping Motors series features a holding torque of 125 oz-in. It has a rotor inertia of 0.0034 oz-in2s2 and...

The M061-LE02 is a stepping motor manufactured by Danaher. Part of the Slo-Syn Stepping Motors series, it features a 6-wire bipolar configuration, ...

The M061-FD02E stepping motor operates at 6.3 VDC, has a peak current rating of 1.0 A, and a winding resistance of 6.3 ohms. Part of the Slo-Syn St...

The M.1300.6042 by Danaher is part of the Block IO Analog Modules series. This module operates on 24 VDC (20–30 VDC), supports 4 A continuous per o...

The M.1017.3143 is a module by Danaher in the Block IO Analog Modules series. It features a 24 VDC, 300 mA power supply with 250 μs inrush, two 18-...

The KT4020-00 from Danaher weighs 29 kg and delivers a continuous output current of 24 ARMS. Part of the NEXTDRIVE Frequency Drives series, it supp...

The KSL091T1Y motor by Danaher is part of the Slo-Syn Synchronous Motors series. It delivers 240 oz-in (169 Ncm) of torque, operates at 120 or 240 ...

The Danaher KS 40-1 from the Thermal Controllers series delivers a scanning cycle of 100 ms. It features over 14-bit input resolution, an IP65 spla...

The BR16A6 timer is surface-mounted, operates at 120 VAC, runs at 50/60 Hz, and weighs 0.16 kg. Part of the Timers and Controllers series manufactu...

The KMT091F05 is a stepping motor manufactured by Danaher. Part of the Slo-Syn Stepping Motors series, it delivers 1.27 Nm holding torque and 1.8° ...

The HS35R0360800D boasts a 15 mm bore and heavy-duty hollow shaft supporting up to 3600 RPM speeds. Manufactured by Danaher in the Dynapar Encoders...

The Danaher HG109A6 timer is part of the Timers and Controllers series and accepts 120VAC input at 60Hz. It offers an adjustable 10-hour timing ran...

The HG106A6 from Danaher is an ON/OFF repeat cycle timer and supports symmetrical and asymmetrical cycles. Part of the Timers series, it uses dual ...

The HG101A6 is a timer manufactured by Danaher. In the Timers series, it offers a 60 s range with 1 s minimum driven by a 2.5 VAC motor. It has dua...

The H420600 is an incremental optical shafted encoder manufactured by Danaher and part of the Dynapar Encoders series. It offers a resolution range...

The Danaher H420500 from the Dynapar Encoders series features an aluminum housing. It delivers resolutions from 8192 to 10000 PPR, supports shaft s...

The EA700-55108 by Danaher is a precision Snaplock Limit Switches device featuring adjustable lever increments of 730 over 360, Form Z silver alloy...

The B506-5001 is a hydraulic cylinder by Danaher in the Timers and Controllers series, featuring a 50 mm bore, 32 mm rod diameter and a 500 mm stro...

The SS451TG9 is a synchronous motor manufactured by Danaher in the Slo-Syn Synchronous Motors series, featuring a 9:1 gear ratio and delivering 405...

The Danaher SS451TG4 gear motor is part of the prestigious Slo-Syn Synchronous Motors series and stands out as a precision single-phase drive solut...