Danaher

The Danaher 0149000-101 is a precision timing and counting device from the Timers and Controllers series by Danaher. Housed in a rugged zinc die ca...

0149000-103 is a timer and controller manufactured by Danaher. Part of the Timers and Controllers series, it features a 12 VDC nominal coil voltage...

The Danaher 0703006-003 from the Timers and Controllers series offers IP67 ingress protection. It has a pneumatic impulse drive mechanism, operates...

The Danaher 1007-0085 board is a robust interface card from the Synqnet Boards series by Danaher. Constructed from aluminum alloy with an anodized ...

The 10BRCX-401-B1A/20 resolver features a basic outer diameter of 1.0 inch, a housing length of 0.65 inch, a durable steel housing, and weighs 1.3 ...

The 1107-0097 control board runs at 266 MHz and features dual-port Ethernet SynqNet connections through two RJ-45 ports. Part of the Synqnet Boards...

The 11BRCT-300-M-10A resolver from Danaher in the Dynapar Resolvers series offers robust performance. It operates at 2,500 Hz with a rated voltage ...

The 11BRCT-300-P95D-01 resolver is manufactured by Danaher. Part of the Dynapar Resolvers series, it offers 4 arc-min accuracy and 0.39 V/V ratio. ...

The 11BRCT-300-S-10A/5 resolver from Danaher's Dynapar Resolvers series delivers precise performance in industrial settings. It features an IP-65 r...

11BRCT-300-T64A is a resolver manufactured by Danaher. Part of the Dynapar Resolvers series, it operates at 12.0 Vrms input voltage and 2500 Hz exc...

The 11BRCX-300-A-95-01 resolver from Danaher’s Dynapar Resolvers series is a rotor-mounted, single-speed device. It operates with an excitation vol...

The 11BRCX-300-A95 resolver features seven output channels, a nominal voltage of 7.5 V, and a rated speed of 4,000 rpm. Part of the Dynapar Resolve...

The Danaher 11BRCX-300-B-10A resolver is part of the Dynapar Resolvers series by Danaher. It features rotor mounting, operates at an input voltage ...

The Danaher 11BRCX-300-B1 resolver, part of the Dynapar Resolvers series, features a rotor mounting type. It operates with a 7.5 Vrms excitation vo...

The Danaher 11BRCX-300-C10/3 is a brushless resolver in the Dynapar Resolvers series designed for servo motor feedback. It operates with a 6 V exci...

11BRCX-300-E-74 is a rotor-mounted resolver made by Danaher. It belongs to the Dynapar Resolvers series and uses a 7 V rms nominal input. It delive...

The 11BRCX-300-E1 resolver features an optimized rotor mounting, supports a 7-7.5 Vrms input voltage and operates up to 125 C in demanding environm...

The Danaher 11BRCX-300-F10/10 heavy-duty brushless resolver from the Dynapar Resolvers series by Danaher features a nominal excitation voltage of 1...

The 11BRCX-300-J10C from Danaher is a brushless resolver and features a single-rotor design. Part of the Dynapar Resolvers, it runs at a rated volt...

The 11BRCX-300-P10/6 rotor-mounted resolver has a transformation ratio of 0.55, operates at 10.0 V rms excitation, and includes a 10-pin IP65 conne...

11BRCX-304-E-82 is the shortest resolver, offering a null voltage near 82 mV and an operating range up to 125C. Danaher makes this Dynapar Resolver...

The 11BRW-300-B-10 from Danaher has a single-speed rating and 7.5 Vrms rated voltage. Part of the Dynapar Resolvers, it runs at 4000 Hz, draws 40.0...

The 11BRW-300-B-4 from Danaher offers a primary accuracy of 10 arc-min and a 4-wire configuration for efficient termination. Part of the Dynapar Re...

The Danaher 11BRW-300-B-60 resolver is part of the Dynapar Resolvers series and uses stator mounting. It runs on 12.0 Vrms input, provides a 12° ph...