Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MAC090C-0-KD-3-C/130-B-2/S029

MAC090C-0-KD-3-C/130-B-2/S029

by Bosch Rexroth Indramat
Request a quote
The Bosch Rexroth Indramat MAC090C-0-KD-3-C/130-B-2/S029 is an AC servomotor featuring a customized mounting flange and uses natural convection for its cooling needs. It’s equipped with a shaft seal and an effective closing-circuit inspired blocking brake. The power connection output and its second shaft end are found on its side B. The servomotor comes with tacho feedback. Notably, it should be transported carefully to prevent damage. The device is designed to be run with a TDM series drive controller, allowing it to be installed outside of a control cabinet due to its impressive protection rating. Operating curves include speed and torque limiting data, with its usable speed being determined by the paired drive. The motor should be cooled before handling, with a maximum duty cycle time of 15 minutes for intermittent operations. It requires wiring as per the machine manufacturer's terminal diagram and possesses protective covers on the connector housing and output shaft. It is environment-friendly and can be identified via its rating plate. Cable lifespan is approximately one million bending cycles.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Name: MAC090C-0-KD-3-C/130-B-2/S029 AC servomotor
  • Flange Type: Mounting with customized pilot diameter
  • Cooling Method: Natural convection
  • Sealing: Equipped with Shaft sealing
  • Brake Type: Heavy-duty blocking brake working on closed-circuit principle
  • Power Output Direction: Associated with side B
  • Shaft End: Second shaft end present on side B
  • Feedback: Tacho feedback
  • Handling: Requires proper handling and transportation
  • Length Code: C
  • Cleaning: Not to be cleaned by hash cleaning agents
  • Drive Controller: Operates with TDM series drive controller
  • Installation Place: Can be installed outside control cabinet (based on protection rating)
  • Operational Data: Displays speed limiting and torque limiting data
  • Operational Speed: Dependent on associated drive
  • Cooling Time: Requires cooling down after operation
  • Duty Cycle Time: Maximum 15 minutes with intermittent operations
  • Environmental Impact: No harmful substances
  • Wiring: Must be wired in accordance with machine manufacturer terminal diagram
  • Protection: Comes with protective covers on shaft and connector housing
  • Identification: Via its rating plate
  • Cable Lifespan: One million bending cycles.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204