New products

The HSM490 servo motor delivers 1500 VACrms dielectric strength at 50/60 Hz, meets IP65 via MIL-SPEC MS-3102R12S-3P connectors, has 80–85 lb-in con...

The HS35R0360800D boasts a 15 mm bore and heavy-duty hollow shaft supporting up to 3600 RPM speeds. Manufactured by Danaher in the Dynapar Encoders...

The Danaher HG109A6 timer is part of the Timers and Controllers series and accepts 120VAC input at 60Hz. It offers an adjustable 10-hour timing ran...

The HG106A6 from Danaher is an ON/OFF repeat cycle timer and supports symmetrical and asymmetrical cycles. Part of the Timers series, it uses dual ...

The HG101A6 is a timer manufactured by Danaher. In the Timers series, it offers a 60 s range with 1 s minimum driven by a 2.5 VAC motor. It has dua...

The H420600 is an incremental optical shafted encoder manufactured by Danaher and part of the Dynapar Encoders series. It offers a resolution range...

The Danaher H420500 from the Dynapar Encoders series features an aluminum housing. It delivers resolutions from 8192 to 10000 PPR, supports shaft s...

The G7.56.100-3469 axis drive features a 25 mm2 conductor cross-section, measures 80 x 398 x 200 mm, and weighs 6 kg. Part of the F5 Combivert Axis...

The G12A.DL80G4.CN07 synchronous servo motor weighs 13 kilograms and operates at 24VDC. Manufactured by KEB as part of the SM Synchronous Servo Mot...

The FSM620 servo motor from Kollmorgen is part of the FSM Brushless Servo Motors series. It features a robust brake system with 31.1 Nm holding tor...

The FM3312-B310-0010 is a 12 mm linear motion guide block with a static load rating of 8.0 kN. Beckhoff’s FM Thermocouplers series offers a block m...

The FD-50444 from Kollmorgen runs at 172VDC and up to 2200 RPM. Part of the ServoDisc Pancake DC Motors series, it delivers 38–533 W and employs fl...

The FC9151 is a Mini PCI communication card manufactured by Beckhoff. It belongs to the FC Lightbus Cards series and supports 10/100/1000 Mbit/s da...

The FC-301PK55T4E20 automation drive from Danfoss is part of the VLT FC 301 Automation Drives series. It delivers 0.55 kW (0.74 hp) shaft output, 1...

ES9100 is an EtherCAT terminal manufactured by Beckhoff. It is part of the ES EtherCAT Terminals series and uses 24 V DC nominal voltage. The 12 mm...

The ES5001 terminal from Beckhoff's ES EtherCAT Terminals series provides a single-channel encoder interface for absolute encoders. It supports RS4...

The ES1512 EtherCAT Terminal from Beckhoff is part of the ES EtherCAT Terminals series. It features a 32-bit counter depth, counts up to 1 kHz, and...

The ER-FC2048 is an absolute encoder manufactured by Okuma and part of the Absolute Encoders series. Its hollow shaft design and stainless steel ho...

The EL9200 is a potential supply terminal by Beckhoff. Part of the EL EtherCAT Terminals, it supplies 24 V DC at up to 10 A. Green Power and red De...

Beckhoff EL2124 is part of the EL EtherCAT Terminals series and serves as a digital output terminal with four outputs. It features 24 V DC signalli...

The Beckhoff EK1000 Ether CAT Coupler, part of the EK EtherCAT Couplers series, features an IP20 protection class. It supports up to 65,535 termina...

The EJ3108 module from Beckhoff's EJ EtherCAT Plugins series provides an 8-channel analog input with ±10 V signal range and 16-bit resolution. It f...

The Beckhoff EJ1859 digital I/O module is part of the EJ EtherCAT Plugins series and operates at 24V DC. It features 8 input channels, 8 output cha...

The EJ1809 input module features 16 digital inputs, a 2 x 20-pin socket strip, a typical 3 ms input filter, and weighs approximately 30 g. Part of ...