New products

The VT-HACD-1-12/V0/1-0-0 controller from Bosch Rexroth Indramat is part of the VT-HACD Digital Axis Controllers series. It accepts a 100–240 VAC p...

The VT-5041-30/3-0 is an Electronic amplifier by Bosch Rexroth Indramat, part of the VT-5000 IO Cards series. This proportional controller supports...

The VT-5014 S32 IO card from Bosch Rexroth Indramat is part of the VT-5000 IO Cards series. It features a programmable ramp time range of 30 ms to ...

The VT-5014 S30 from Bosch Rexroth Indramat operates on 24 V DC and tolerates +40%/−10% input variation. Part of the VT-5000 IO Cards series, it su...

The Bosch Rexroth Indramat VT 5041-24/3-0D is an IO card from the VT-5000 IO Cards series featuring a 32-pin male DIN 41612 connector, 24 V DC oper...

The Bosch Rexroth Indramat VT 5012 S31 is an IO card in the VT-5000 IO Cards series. It operates on 24 V DC (+40%/-10%), provides ±15 V aux output,...

The VT 5005 S10 from Bosch Rexroth Indramat features an RJ45 connector and supports data transmission at up to 1 Gbps. Part of the VT-5000 IO Cards...

The VT 3006-36a analog amplifier accepts a 230 V AC input, provides a 36 V DC output, offers ≥90% efficiency, and operates continuously with IP20 p...

The VT 2010 S 45 operates at 230 V AC and consumes 2.2 kW of power. Manufactured by Bosch Rexroth Indramat as part of the VT 2000 Proportional Ampl...

The VT 10681 from Bosch Rexroth Indramat offers a nominal coil resistance of 2000 Ω and an IP67 protection rating. Part of the VT 1600 Servo Amplif...

The VM60/EB is a power supply module manufactured by Bosch Rexroth Indramat. Part of the VM Amplifier Drives, it accepts 3/PE AC 400V input at 50Hz...

The Kollmorgen TTE-2043-3025-B-38 motor from the Inland Direct Drive Motors series delivers a peak torque of 770 oz-in. It runs at 3000 RPM with 25...

The T406T-012 servo motor delivers 60W of output power and a rated speed of 3000 RPM. Manufactured by Sanyo Denki in the T SANMOTION series, it del...

The Copley Controls STP-075-07 from the Stepnet Compact Drives series features a 230 V input voltage. It offers a 0–800 Hz output frequency range, ...

The ST-5114 digital output module features 24 Vdc nominal input power, four output channels, photo-coupler isolation, and a maximum input frequency...

The ST-5112 high-speed counter from Kollmorgen's Crevis Slice Modules series is a GE Fanuc RSTi dual-channel device for precision motion control. I...

ST-4212 from Kollmorgen's Crevis Slice Modules series operates at 24V DC and features an IP65 rating. It offers two analog output channels with 12-...

The ST-3802 module by Kollmorgen is part of the Crevis Slice Modules series. It supports two-channel input in a single common wiring, offers photoc...

The ST-222F module provides 16 digital outputs at 24 VDC. Manufactured by Kollmorgen for the Crevis Slice Modules series, it uses positive PNP logi...

The SSU from Okuma is made of polysulfone and has a maximum inlet pressure of 75 psi. Part of the MDU Servo Drives series, it offers I/O connectivi...

The SS451TG9 is a synchronous motor manufactured by Danaher in the Slo-Syn Synchronous Motors series, featuring a 9:1 gear ratio and delivering 405...

The Danaher SS451TG4 gear motor is part of the prestigious Slo-Syn Synchronous Motors series and stands out as a precision single-phase drive solut...

The Danaher SS451TG12 is a precision synchronous motor from the Slo-Syn Synchronous Motors series. It operates on 120 V single phase, delivers 450 ...

The SS451T is a synchronous Type A stepping motor by Danaher, part of the Slo-Syn Synchronous Motors series. It operates at 120 V AC single-phase w...