New products

The MAC090C-0-KD-2-C/110-A-0 motor from Bosch Rexroth Indramat is part of the MAC AC Servo Motors series. It operates on a 100-240 VAC power supply...

The MAC090B-0JD-4C/110-A-1/WI524LV servo motor by Bosch Rexroth Indramat is part of the MAC AC Servo Motors series. It produces 6.7 Nm of constant ...

The MAC025A-0-WS-3-E/040-A-0 from Bosch Rexroth Indramat is part of the MAC AC Servo Motors series. It features electrical commutation optimized fo...

The Danaher M112-FF-206 is a robust bipolar stepper motor in the Slo-Syn Stepping Motors series, featuring a square flange and 1.8° per step resolu...

The M.1301.4145 is an analog module manufactured by Danaher. Part of the Block IO Analog Modules series, it provides four inputs and four outputs w...

The LE06260 is a limit switch from Kollmorgen's CD Servostar CD Drives series. It features a plunger actuator, 1NC/1NO contact configuration and a ...

The LB10565 is a drive component manufactured by Kollmorgen. Part of the CD Servostar CD Drives, it handles up to 120 bar and runs from -40 °C to 2...

The Beckhoff KS6041 is a robust module in the KS Digital Input Modules series by Beckhoff, powered via the K-bus with a typical 65 mA consumption. ...

The KS4002 digital input module provides two 0–10 V outputs, 12-bit resolution, a conversion time of approximately 1.5 ms, and supports a maximum l...

The KM1004 from Beckhoff has an inner diameter of 10 mm and an outer diameter of 16 mm. Part of the KM Bus Terminals series, this bearing is made o...

The KL9540 from Beckhoff features a nominal voltage of 24 V DC (-15 %/+20 %) and is housed in a polycarbonate body weighing approximately 40 g. Par...

The KL9508 module by Beckhoff is part of the KL Analog Input Modules series, delivering a stabilized 8 V DC output with +-1% accuracy. It supplies ...

The Beckhoff KL9210 module from the KL Analog Input Modules series provides reliable distributed power with a nominal voltage of 24 V DC and a maxi...

The KL9200 is a potential supply terminal manufactured by Beckhoff. It belongs to the KL Analog Input Modules series and mounts on a DIN rail. The ...

The KL3061 from Beckhoff features a resolution of 12 bit and consumes typically 60 mA via the K-bus. Part of the KL Analog Input Modules, it accept...

The KL2114 from Beckhoff features four outputs and a nominal voltage of 24 V DC. Part of the KL Analog Input Modules, it uses 2-/3-wire connection ...

The KL1512 is an analog input module manufactured by Beckhoff. As part of the KL Analog Input Modules series, it offers one or two 16-bit up/down c...

The KDA 3.3-100-3-A0I-U1 drive controller from Bosch Rexroth Indramat is part of the KDA Spindle Drives series. It features a rated current of 100 ...

The Kollmorgen HSM610 from the HSM Brushless Servo Motors line is a high-performance industrial drive designed for precision motion control. Featur...

The H420120 encoder is manufactured by Danaher. Part of the Dynapar Encoders series, it offers a resolution range of 1 to 2540 PPR. It supports inp...

The Kollmorgen FSM430 from the FSM Brushless Servo Motors series is a high-performance servo motor engineered for precision motion control in indus...

The Danfoss FC-101P11KT4E20H4 is part of the VLT FC 101 HVAC Basic Drives series and delivers 11 kW of power. It runs on 380-480 V three-phase, sav...

The ES4038 from Beckhoff offers 8 analog outputs and a resolution of 12 bits. As part of the ES EtherCAT Terminals series, it features a signal vol...

The EL1252 is a digital input EtherCAT terminal from Beckhoff’s EL EtherCAT Terminals series. It provides 2 channels for 24 V DC signals, drawing a...