Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

AKD-P01207-NBCN-0000

Original price $6,724.00 - Original price $6,724.00
Original price
$6,724.00
$6,724.00 - $6,724.00
Current price $6,724.00
Available, Shipping Varies
Request a quote
The AKD-P01207-NBCN-0000 is an industrial Ethernet-based servo drive created by Kollmorgen that adheres to specific national standards or directives. It is essential to install the equipment on a conductive panel and link it to the Protective Earth ground as an initial setup requirement. The device cannot interact with your computer while detached from its WorkBench software, which is used for its configuration. The front panel of the device features an LED display, and it offers a baud rate of 125 kBits/s. Its connection to the CAN-Bus must be established using a cable with a ground and two terminators. The device can only connect to a computer that is capable of identifying its IP address. The device must be manually connected with a non-plug-and-play feedback device and does not contain an SD card slot. Its direct DC input is routed through the AC input connection and connects to the motor via its X2 connector.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Code: AKD-P01207-NBCN-0000
  • Equipment Type: Industrial Ethernet-based Servo Drive
  • MAC Address Location: Rests on the housing sticker
  • Serviceability: Serviceable only 5 minutes after power is disconnected
  • Configuration: Configured through WorkBench software Setup Wizard
  • Initial Setup Requirement: Installation on a conductive panel and connection to the Protective Earth ground
  • Communication: Cannot communicate with PC when disconnected from WorkBench
  • Display: Front panel top-positioned LED display
  • Baud Rate: 125 kBits/s when rotary switches are set to 91
  • Node Address: Assigned separately from MAC and IP addresses
  • CAN-Bus Connection: Requires cable with ground connection and two terminators
  • Network Configuration: Identifiable IP address through PC network configuration
  • Additional Features: No SD card slot, online-offline status change not possible through WorkBench software
  • Input: Direct DC input runnable into the AC input connection
  • Motor Connection: Connected at X2 connector
  • Support Capability: Supports second feedback
  • Non-Plug-and-Play Setup: Motor parameters must be manually entered.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204