Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

AKM74P-ACCNR-01

Original price $5,255.40 - Original price $5,255.40
Original price
$5,255.40
$5,255.40 - $5,255.40
Current price $5,255.40
Available, Shipping Varies
The product, AKM74P-ACCNR-01, is a high-quality synchronous servomotor produced by Kollmorgen. It features a shaft seal, large mounting dimensions due to its fan, and uses a resolver as a feedback mechanism. It's crafted with a Class 2K3 climatic category in compliance with IEC 60721-3-2 / EN61800-2 standards. It's important to secure all screws on the lifting eyes for safe transport and to prevent damage. Information such as the number of phases, standstill torque, and current, rated speed, power, maximum operating temperature, and protection rating can be found on the nameplate. The motor has a flange size of 180mm, per IEC standards, with N accuracy. To avoid damage, ensure the correct number of poles is applied in the motor and resolver. Before use, verify compliance with permissible axial and radial forces. Assembly and wiring are executable when de-energized, and proper grounding is required before operation. Wait for 10 minutes after switching off to avoid dangerous residual charge. The motor’s five pole pairs and lack of a holding brake contribute to its standard length. Wiring should conform to the servo amplifier's manual instructions.
30 Day Warranty
Technical Specifications
  • Product Model: AKM74P-ACCNR-01
  • Manufacturer: Kollmorgen
  • Device Type: Synchronous Servomotor
  • Feedback Type: Resolver
  • Mounting Dimensions: Increased due to fan
  • Transportation Method: Lifting eyes on housing
  • Climatic Category: Class 2K3 according to IEC 60721-3-2 / EN61800-2
  • Screw Requirements: Must be fully screwed in for lifting eyes
  • Flange Size: 180 mm with N accuracy
  • Compliance Check: Permissible axial and radial forces
  • Working Condition: De-energized state for assembly and wiring
  • Grounding Requirement: Should be grounded properly before operation
  • Voltage Risks: Dangerous residual charge for 10 minutes after power is turned off
  • Pole Pair Count: Five
  • Length: Standard due to absence of holding brake and because of standard resolver feedback

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204