Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of HDS02.2-W040N-HT76-02-FW

HDS02.2-W040N-HT76-02-FW

by Bosch Rexroth Indramat
Request a quote
The HDS02.2-W040N-HT76-02-FW drive controller, manufactured by Bosch Rexroth Indramat, is part of the HDS series and the DIAX04 product range. Not suitable for use in construction cranes, refinery plants, elevators or medical equipment, this device requires a careful operation environment to prevent dangerous movements caused by defective components or malfunctioning encoders or sensors. Expected to remain disconnected from power during extended periods of non-use, it performs effectively under moderate temperature and up to 1,000m above sea level. The controller has a power consumption of 20W for signal processing from a +/-26V source and needs to be stored and transported in a dust-free, shock-absorbing environment to prevent damage. It delivers a continuous current of 15A at 8kHz, is optimized for vertical mounting with the motor connection at the bottom, and features an error message generator via an H1 display. The controller is designed and checked in line with DIN VDE 0160 specifications.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: HDS02.2-W040N-HT76-02-FW
  • Series: HDS
  • Product Group: DIAX04
  • Use Limitations: Not for use in construction cranes, refinery plants, elevators, or medical equipment
  • Operation Caution: Potential for dangerous movements due to defective components or malfunctioning monitoring circuits, encoders, or sensors
  • Power Disconnection: When not in use for long periods
  • Temperature Limitations: Should not be used in very high temperatures or extreme temperature fluctuations
  • Installation Height: Maximum of 1,000m above sea level
  • Power Consumption: 20W from a +/-26V source for signal processing
  • Storage Requirements: Dry, dust-free environment
  • Transportation Requirements: Use shock-absorbing supports for transit
  • Packaging: Components prone to electrostatic discharge should be in conductive packaging
  • Mounting: Must be vertically on mounting rails with motor connection at the bottom
  • Mounting Hardware: M5 screws in alternate slots
  • Ground Connection: Established with a grounding clip at the lower edge
  • Display: H1 display for error messages and SERCOS interface
  • Insulation and Voltage Testing: According to DIN VDE 0160 specifications
  • Current: 15A continuous at 8kHz.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204