Skip to content
Call:1-888-551-3082 International: 1-919-443-0207
Call:1-888-551-3082 International: 1-919-443-0207


Original price $4,332.00 - Original price $4,332.00
Original price
$4,332.00 - $4,332.00
Current price $4,332.00
In Stock, Shipping Varies
The Bosch Rexroth Indramat manufactured KSM01.2B-071C-10N-S1-HG0-SE-NN-D7-NN-FW distributed servo drive is designed for basic performance with a size code of 071 and requires careful handling. It should be started only after all guards and covers are properly installed and the power connections should never be touched when live. Any operational irregularities such as incorrect parameter input or improper cabling can cause potentially dangerous movements. Thus, during maintenance, cleaning or prolonged disuse, the product must be disconnected properly to prevent accidental startups. This device shouldn't be operated near any radio, high-frequency or remote-control equipment, and is meant for use in industrial environments. The functioning of the units can be monitored through the H14 LED. Additionally, during transport or storage, the protective sleeves of the motor must be used to prevent damages. The mounting process requires a dust-free, dry environment, and M10 screws with a 51Nm torque for the flange. Firmware updates can be attempted from the multimedia card during switch on/off procedures.
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Type: Distributed Servo Drive
  • Model: KSM01.2B-071C-10N-S1-HG0-SE-NN-D7-NN-FW
  • Size Code: 071
  • Safety Precaution: Avoid contact with electrical connection points when powered
  • Environmental Protection: Requires external housing for water and external contact protection
  • Usage Limitation: Not suitable for operation near radio, high-frequency, and remote-control equipment
  • LED Indicator: H14 LED (Flashes green if parameter mode is activated or error-free but not enabled)
  • Stress Condition: Agitate condition may cause injury or property damage
  • Storage and Transport: Protective sleeves of motor must be installed
  • Mounting Requirements: Dust-free and dry environment
  • Mouting Hardware: M10 size screws
  • Tightening Torque: 51Nm
  • Firmware Update: Capability of reloading firmware from multimedia card after update failure

Get In Contact


Phone Number: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204