Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
subseries image of MDD090B-N-030-N2M-130PA1

MDD090B-N-030-N2M-130PA1

by Bosch Rexroth Indramat
Request a quote
The Bosch Rexroth Indramat MDD090B-N-030-N2M-130PA1 is a robust digital AC servomotor engineered for high precision environments such as grinding machines. The motor, which operates like a synchronous motor with electronic commutation, integrates a laminated core with permanent magnets and has a 3000min-1 nominal speed. The unit also includes a digital servo feedback system with a built-in multiturn absolute encoder. Its housing is fully sealed, enabling it to function in challenging conditions. The motor is designed for easy installation, with a B5 design mounting flange that includes through-holes. Its shaft can withstand radial loads depending on the force application point and mean speed. The MDD090B-N-030-N2M-130PA1 also includes a blocking brake controlled by the connected drive controller. Along with reliable global delivery, the product includes a one-year backup support, affirming Bosch Rexroth’s commitment to quality and customer service.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Type: Digital AC Servomotor
  • Model: MDD090B-N-030-N2M-130PA1
  • Maximum Speed: Based on DC Bus Voltage
  • Nominal Speed: 3000min-1
  • Core Type: Laminated Core with Permanent Magnets
  • Motor Housing: Completely Sealed
  • Feedback Type: Digital Servo with Integrated Multiturn Absolute Encoder
  • Installation Elevation: Not more than 5000m over sea level
  • Motor Housing Coat Thickness: Can exceed by 40µm
  • Lateral Axis Features: Type II Total Shock-Response Spectrum (IEC 721-1 Specifications)
  • Mounting: Design B5 Mounting with Pilot Diameter 130mm
  • Shaft Load: Radial, based on point of application of force and average speed
  • Shaft Thermal Deformations: Up to 0.6mm
  • Brake Control: Through connected Drive Controller
  • Power Connector Orientation: A-side
  • Electrical Connections: Standardized with Drive Controller
  • Data Storage: In Feedback Parameters
  • Encoder Function: Absolute Position detection
  • Operating Modes: Two
  • Thermal Time Constant: 60 Minutes with natural convection
  • Tightening Torque: Maximum 5Nm for screws in shafts center hole

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204