Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-P01207-NCEI-0000

AKD-P01207-NCEI-0000

by Kollmorgen
$9,002.95 - $9,002.95
$9,002.95
$9,002.95 - $9,002.95
$9,002.95
Available, Shipping Varies
Produced by Kollmorgen, the AKD-P01207-NCEI-0000 is an Ethernet-based servo drive with Ethernet/IP connectivity. Use of the device is restricted to its defined current and voltage ratings. It must operate away from insulating materials and always utilized with low-resistance earthing. Prior to handling, ensure the heatsink temperature stays below 40°C. The servo drive should be enclosed in a control cabinet with closed doors and should be used without tampering with inbuilt protective features. Compatibility ranges from induction machines to synchronous servomotors. It features a regen circuit for dynamic power sharing among drives. For adherence to IEC 61800-5-1 standards, the drive must have a protective earth connection and employs an RJ-45 X11 connector as its serial interface, boasting less than 100V and 1A current rating. Keep in mind, overvoltage at terminals may harm the device, as will physical shocks during transportation. This servo drive, capable of 30 Arms peak output current for 5 seconds, comes with a built-in ventilation system and auto-shutdown feature when undergoing overheat.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Code: AKD-P01207-NCEI-0000
  • Connectivity: Ethernet/IP
  • Operating Conditions: Within permissible current and voltage ratings
  • Safety Precaution: Avoid contact with highly insulating materials
  • Heat Sink Temperature: Should be lower than 40°C before touch
  • Protection Measures: Should be used with all protections and covers intact
  • Compatible Machines: Induction machines, linear and synchronous servomotors
  • Inbuilt Regen Circuit: Yes, distributes power among multiple drives associated with same DC bus link circuit
  • Wiring: FAULT contact wired with emergency off circuit
  • Protective Earth Connection: According to IEC 61800-5-1 specifications
  • Serial Interface: RJ-45 X11 connector with Less than 100V rating and 1A current rating
  • Voltage at Terminals: Never more than 10% of rated value
  • Transportation Requirement: Free of shock
  • Peak Output Current Rating: 30 Arms for 5 seconds with +/-3% tolerance
  • Ventilation: Inbuilt Fan
  • Overheat Shutdown: May shut down indicating F202 code on LED display if control cabinet gets very hot.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204