Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKM22E-ACC2R-00

AKM22E-ACC2R-00

by Kollmorgen
$1,049.99 - $1,049.99
$1,049.99
$1,049.99 - $1,049.99
$1,049.99
In Stock, Ships Today
The AKM22E-ACC2R-00 is a synchronous servomotor produced by Kollmorgen, featuring an E type winding and an adhesively attached nameplate on its housing. Designed for use with Kollmorgen's SERVOSTAR amplifier, it also includes an integrated thermal contact in its windings. The classification of insulation is Class F and the unit requires earthing to a protective busbar when installed. Notably, the housing may heat up during operation, and should never be cleaned using immersion or spray methods. Information on DC bus link voltage and rated power can be found on the device's nameplate. Having a torque of 0.87 Nm and a standstill current of 2.73 A, it is best utilized in tasks demanding high dynamics and stability. The device, with an ambient operation temperature capped at 40°C, has three pole pairs and a designed holding brake for standby mode. The assembly must occur in a de-energised state and care should be taken to avoid force, protecting the delicate bearings.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Code: AKM22E-ACC2R-00
  • Product Type: Synchronous Servomotor
  • Winding Type: E type
  • Amplifier Compatibility: SERVOSTAR Amplifier
  • Assembly Instruction: Read the associated documentation before setup
  • Safety Requirement: Housing must be earthed to the protective earth busbar
  • Heat Generation: Motor surface can become hot during operation
  • Thermal Contact: Integrated in windings
  • Cleaning: Cannot be immersed in or sprayed with liquid
  • Fluid Accumulation: No Fluid accumulation around the shaft when installed vertically
  • Motor storage time: Unlimited
  • Housing Condition: Can become dirty after long operating hours
  • Rated DC bus link Voltage and Power: Detailed on nameplate
  • Standstill Torque: 0.87Nm
  • Standstill Current: 2.73 A
  • Insulation Class: Class F
  • Ideal Application: High dynamics and stability requirements
  • Maximum Ambient Operating Temperature: 40°C
  • Tolerance Class: N
  • Drive Option: Can have high radial force when driven through pinions
  • Pole Pairs: Three
  • Brake Type: Standstill brake
  • Extended Length: Due to holding brake
  • Stress Guarding: Required for proper operation
  • Force Impact: Bearings get damaged when subject to force.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204