Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKM41H-AN92GF00

AKM41H-AN92GF00

by Kollmorgen
$7,513.68 - $7,513.68
$7,513.68
$7,513.68 - $7,513.68
$7,513.68
Available, Shipping Varies
The AKM41H-AN92GF00, a synchronous servomotor from Kollmorgen, should be installed in a manner that allows free ventilation from all sides. This lightweight motor, weighing just 2.44 kg, is designed for machinery requiring high dynamics. Its features include a rotor length of 1, a holding brake with a 24 VDC voltage rate, and a maximum speed of 8000 min-1. The motor is UL Recognized, CE Certified, and cUL Recognized. Its configuration includes a smooth cylindrical shaft end and an H type winding, but its coating is not solvent-resistant. With a vibration tolerance of 10G / 10-2000 Hz as per EN 60068-2-6 standards, it can endure an axial load of 180 N at 3000 min-1. A holding torque of 6 Nm at 120 °C, and 95% relative humidity resistance are other key features. Avoid immersing this motor in liquid and use only cables and servo amplifiers provided by the manufacturer. Retrofitting of the holding brake is not supported.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Model: AKM41H-AN92GF00
  • Installation Requirement: Unhindered ventilation on all sides
  • Compatible Collet Type: Frictionally locking collets
  • Rotor Length: 1
  • Holding Brake Voltage Rating: 24 VDC
  • Certification: UL Recognized, CE Certified, cUL Recognized
  • Shaft End Type: Cylindrical smooth
  • Max Rated Speed: 8000 min-1
  • Winding Type: H type
  • Coating: Not resistant to solvents
  • Vibration Resistance: 10G / 10-2000 Hz as per EN 60068-2-6 standards
  • Maximum Axial Load: 180 N at 3000 min-1 at the shaft end
  • Weight: 2.44 kg
  • Holding Brake Torque: 6 Nm at 120 °C
  • Application: Machinery where high dynamics is of prime importance
  • Cable and Servo Amplifier Requirement: Must be supplied by manufacturer
  • Stator Composition: Three-phase winding
  • Holding Brake: Not suitable for retrofit
  • Rotor Description: Permanent magnets embedded
  • Relative Humidity at Operation: 95%
  • Operating Condition: Will not rotate if holding brake is not released
  • Fault Condition: Errors in the parameters of the servo amplifier.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204