![series image of HDS03.2-W075N-HS41-01-FW](http://servosupplier.com/cdn/shop/files/HDS_Series__01HRAN833D0W89C3BTYTFNSNY7_95d49f98-1686-487e-84b9-3a07220f3a34_700x700.webp?v=1723240812)
HDS03.2-W075N-HS41-01-FW
Original price
$10,956.00
-
Original price
$10,956.00
Original price
$10,956.00
$10,956.00
-
$10,956.00
Current price
$10,956.00
The HDS03.2-W075N-HS41-01-FW is a second-generation drive controller engineered by the globally recognized Bosch Rexroth Indramat. This controller works effectively with MHD, MKD, and MKE motors, storing motor-dependent parameters through the motor feedback. The application module software, responsible for system mechanics, control loop, and interface parameters, resides in the programming module. Data can be temporarily held in the RAM or permanently stored in the EEPROM, transfer accessible via the service channel. In case of firmware alterations, the drive detects them immediately upon startup. The HDS03.2-W075N-HS41-01-FW requires a minimum bottom clearance of 300 mm for air intake and outlet. It operates with a rated control voltage input of 26 ± 2%, a rated power consumption of 25 W without holding brake or control section, and a short-circuit current rating of 42000 A. The maximum output voltage is 500 V, with a peak frequency of 1000 Hz. The phase output stands at three, with dimensions of 498 mm (height), 308 mm (depth), and 100 mm (width).
![](http://servosupplier.com/cdn/shop/t/3/assets/verified-user-shield-check.svg.med.png?v=160087244090755286241706801379)
30 Day Warranty
Technical Specifications
Get In Contact
Email: sales@servosupplier.com
Phone Number: 1-888-551-3082
International: 1-919-443-0207
Fax: 1-919-867-6204