Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

AKM41H-AND2GF00

Request a quote
The Kollmorgen AKM41H-AND2GF00 is a synchronous servomotor equipped with five pole pairs, requiring effective heat transfer for efficient operation. It is essential that the device adheres to permitted axial and radial forces, and that its electrical connections remain secure when energized to prevent electric arc generation. The motor's capacitors can hold a dangerous residual charge for up to 10 minutes after power disconnection. It is crucial to link the motor to the EMC shielding and earthing instructions specified in the associated servo amplifier's manual. The motor emits EMC interference potentially affecting system functionality if shielding leads are incorrectly installed. The device's hot surface may cause light burns; it is safe to touch only under 40°C. Ensure to avoid accidental contact with live and moving parts during setup. Temperature irregularities might indicate a switched thermosensor or faulty cable. Also, observe a clean installation environment, free of aggressive and conductive materials.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Code: AKM41H-AND2GF00
  • Product Type: Synchronous Servomotor
  • Pole Pairs: 5
  • Voltage: Dangerous voltage from residual charge up to 10 minutes after power disconnect
  • Axial and Radial Forces: Must comply with permitted forces
  • EMC Shielding: Required, as per instruction manual of associated servo amplifier
  • Earthing Connection: Required on casing and mounting plate
  • Motor Cable Capacitance: Less than 150 pF/m
  • Cable Length: Depends on associated servo amplifier
  • Touch Temperature: Below 40°C after cooling
  • Installation Location: Must be free of aggressive and conductive material
  • Unusual Temperature Causes: Possibly due to switched thermosensor or broken/loose cable
  • Peak Current: Higher than rated current based on winding
  • Temperature Rise: Fast when loaded with peak current
  • Radial Load: Potentially high if toothed belts used
  • Power and Control Leads: Possible live state for brief period after turning off power.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204