Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MSK100B-0200-NN-M2-LG1-RNNN

MSK100B-0200-NN-M2-LG1-RNNN

by Bosch Rexroth Indramat
Request a quote
The MSK100B-0200-NN-M2-LG1-RNNN, a synchronous servomotor created by Bosch Rexroth Indramat, is designed to operate effectively in potentially explosive environments for general automation technology-related applications. However, to prevent property damage or personal injury, the motor must only be used as intended and exclusively with the manufacturer’s drive controller. Before starting, the motor must be grounded appropriately with a motor cable. The unit is engineered to work under specific conditions and must not exceed a setup elevation of 1000m above sea level. It features a high-end optical encoder system, a holding brake and an output shaft for optimized performance. Incorrect use can cause dangerous drive controller movements and the surfaces may become very hot during or after use. Disconnecting from power is mandatory during maintenance, repair, or cleaning. The motor is capped at a maximum functioning temperature of 55°C, and corrosion protection is needed on its surface.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Type: Synchronous Servomotor
  • Product Series: MSK
  • Model Number: MSK100B-0200-NN-M2-LG1-RNNN
  • Intended Use: General Automation Technology-Related Applications
  • Required Accessory: Manufacturer’s Drive Controller
  • Grounding Requirement: Requires Grounding with Motor Cable
  • Ambient Conditions: Not for Use Outside Specified Conditions
  • Safety Precautions: Can Trigger Dangerous Drive Controller Movements if Faulty
  • Housing: Can Become Hot During or After Operation
  • Type Plate: Features Type Designation and Technical Details
  • Features: Optical Encoder System, Holding Brake, Output Shaft
  • Pole Pairs: 4
  • Maximum Elevation: 1000m Above Sea Level
  • Mounting Direction: Horizontal and Vertical
  • Usage Limitations: Not for Use Underwater
  • Maintenance Procedures: Disconnect from Electric Power
  • Dismounting Procedures: Relieve Pressure Before Dismounting
  • Maximum Operating Temperature: 55°C
  • Corrosion Protection: Required
  • Drive Controller Programming: Required Before Startup
  • Holding Brake Operation: Used in Standstill Mode During Normal Operation

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204