Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of VT-HNC100-C-3X-P-S-00-000

VT-HNC100-C-3X-P-S-00-000

by Bosch Rexroth Indramat
$7,780.00 - $7,780.00
$7,780.00
$7,780.00 - $7,780.00
$7,780.00
In Stock, Ships 3 - 5 Days
The Bosch Rexroth Indramat's VT-HNC100-C-3X/P-S-00/000 is a compact, single-axis digital axis control device. It can be programmed to suit various requirements and is compatible with Version 6 or 7 of WIN-PED software. This product involves potential risk if not properly used according to its safety instructions. It provides differential pressure control and pressure/force control options. The standout features of this device are its multiple mating connectors, a built-in PROFIBUS DP interface, and a 32-bit power PC. It has two analog current inputs and analog voltage outputs. It can be fitted into a control cabinet with a top hat rail assembly. Prior to use, it requires acclimatization to prevent condensation. With particular detailed specifications for its connection and voltage supply, the proper installation is necessary for efficient operation.
30 Day Warranty
Technical Specifications
  • Product Manufacturer: Bosch Rexroth Indramat
  • Product Series: VT-HNC100-C-3X/P-S-00/000 digital axis control
  • Programming Ability: Yes
  • Software Compatibility: Version 6 or Version 7 of WIN-PED
  • Type of Assembly: Electric assembly
  • Control Options: Differential pressure and pressure/force control
  • Connectors: Multiple mating connectors
  • Component series: 30 to 39
  • Device Interface: One PROFIBUS DP
  • Condensation Risk: Requires acclimatization
  • Protection Rating: Minimum
  • Potential Differences: Occurs when plugs are either connected or disconnected under voltage
  • Device Processor: 32-bit power PC
  • Input/Output: Two analog current inputs and analog voltage outputs
  • Installation: Fitted to control cabinet using top hat rail assembly
  • Voltage Supply Connection: Short
  • Wiring Requirement: Signal and load lines should not be connected in parallel
  • Cable Requirement: Must feature pre-assembled breakout cables at X8M connector
  • Connection to Control Cabinet: Through DIN rail and housing
  • Cable Shielding: Clamping under pull relief, connected to housing through shield pin of Micro Combicon connector
  • Voltage Compatibility: Adheres to requirements of 24V encoder if used.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204